Need your order before Christmas? Please see the final order dates below.

Balustrade Systems with laminated toughened glass: 27th November

Balustrade Systems with toughened glass: 4th December

Bespoke Mirror and Toughened Glass: 4pm, 11th December **

Orders for mirrors and toughened glass ordered from 12th to 18th December will be delivered 27th/28th/29th/30th December.

*Please note that while every effort is made to deliver orders on time, deliveries are not guaranteed and occasionally delays occur outside of our control.

IMPORTANT INFORMATION BELOW.

** If your postcode is below, please see last pre Christmas order dates below

LL,SY,LD,SA,TA,EX,TQ,PL,TR,DT  and AB,PH,DD,IP,NR,PA,FK

4.00pm 4th December

Any orders placed and paid for after this date will be delivered in January 2024.
Christmas Delivery Info & Cut Off Times
Close
Important Notice

Need your order before Christmas? Please see the final order dates below.

Balustrade Systems with laminated toughened glass: 27th November

Balustrade Systems with toughened glass: 4th December

Bespoke Mirror and Toughened Glass: 4pm, 11th December **

Orders for mirrors and toughened glass ordered from 12th to 18th December will be delivered 27th/28th/29th/30th December.

*Please note that while every effort is made to deliver orders on time, deliveries are not guaranteed and occasionally delays occur outside of our control.

IMPORTANT INFORMATION BELOW.

** If your postcode is below, please see last pre Christmas order dates below

LL,SY,LD,SA,TA,EX,TQ,PL,TR,DT  and AB,PH,DD,IP,NR,PA,FK

4.00pm 4th December

Any orders placed and paid for after this date will be delivered in January 2024.

CRL Brushed Nickel Frameless Shower Door Fixed Panel Wall-to-Glass Support Bar for 3/8" to 1/2" Thick Glass

Product code: Z194
£91.94 inc. VAT
  • Product Description

    These CRL Fixed Panel Support Bars stabilize fixed panels of glass in enclosures that do not go all the way up to the ceiling.

    The Wall-to-Glass Bar has a bell-shaped clamping device on the wall side, and a solid brass end cap with a swivelling U-shaped receptacle to secure the fixed glass panel.

    The Glass-to-Glass Bar has solid brass end caps with swivelling U-shaped receptacles on both ends to secure each fixed panel.

    Nylon-tipped set screws secure the glass and prevent glass-to-metal contact. Bars are available in two lengths, and in sizes to secure 1/4" to 1/2" (6 to 12 mm) thick glass.

    No holes or cut-outs are required in the glass.

    • May be Used as an Alternative to CRL Header Kits to Secure Fixed Panels and Provide Safety
    • Use Monolithic Tempered Glass
    • Wall-to-Glass and Glass-to-Glass Models Available
    • Simply Cut to Size to Accommodate Individual Configurations
    • No Hole Drilling Required
...