Please note:
Your sandblasted pattern is applied to the back of the mirror, which leaves the design detail translucent. When applied to a wall or substrate, the background colour will show through slightly. It is a similar effect to placing an object closely behind a frosted glass window. Please ensure your wall is uniform in colour and such things as holes or fixing plugs do not fall where the sandblasted pattern has been applied, as these will show on the face of the mirror, spoiling the overall effect. Additional important information is found in Steps - 3 and 4.
Ensure your wall is clean and dust free.
If any electrical sockets or switches need to be removed or repositioned, we recommend this is done by a qualified electrician.
If you are installing your mirror with adhesive, you will most likely need to support it in position until the adhesive has fully cured (normally 24 hrs). Most sized mirrors will require some form of support, which can be a temporary horizontal wooden batten fixed to the wall or 'plasterers props'. People have angled 2x2 timber to form props, but there are obvious risks using this method. Whichever method you choose, it will need to be prepared before you begin installation.
